Steel Butt Welding Pipe Fittings 45 Degree Cubitus
45 Gradus Cubitus
Materia: Carbon Steel, Steel, Alloy Steel
Technical: ementitus et propellentibus
Connection: Welding
Standard: ANSI, ASME, AP15L,DIN,JIS,BS,GB
Type: 45° et 90° LR/SR Cubitus, Reducers, Tee, Bends, Cap, Cross.
Wall Crassitudo: SCH5-SCH160 XS XXS STD
Superficiem: Nigrum Poena / Rubigo-probationem oleum / Hot Dipped Galvanized
Angli: 30/45/60/90/180°
Magnitudine: 1/2"-80"/DN15-DN2000
Certificatorium: ISO -9001:2000, API, CCS
Applicatio: Industry Chemical, Petroleum Industry, Constructio Industry et Alia
Inspectionem: Factory in-Domus Moderare vel Tertiae Inspectionis
Stipare: Plywood Pallets / ligneus casus aut sicut per tuam Specificationem
Cubitus fistulae conveniens est, quae directionem pipelini in systematis pipelini mutat.Secundum angulum sunt tria cubita frequentissime adhibita: 45° et 90° 180°, et alia angulus abnormis cubitis ut 60° comprehenduntur etiam secundum exigentias rei.Cubitus includunt ferrum conflatum, chalybem immaculatum, stannum chalybem, malleabile fusum ferrum, chalybs carbonis, metallica non ferrea et materia plastica.Connexio methodi cum tibiis includunt: ligamentum directum (modum usitatissimum) nexum flangium, nexum liquefactum calidum, nexum fusionis electricam, nexum stamineum et nexum nervum.Secundum processum producendi, dividi potest in: cubitus glutino, cubitus impressus, cubitus impellens, cubitus projiciens, etc. alia nomina: 90 cubitus gradus, angulus flectitur rectus, amor flectitur etc.
ASME B16.9, B16.28
| Pipe Size | Omnes Fittings | 90 & 45 Cubitus et Tees | Reducers et gremium felis Stub terminos | Caps | |||||||
|
| Extra Diametrum ad Bevel, D (1) | Intus Diameter ad finem (I) | Murus Crassitudo t | Centrum-ad-finis Dimensiones A,B,C,M | Altiore Longitudo, F, H |
| |||||
|
|
|
|
|
|
| Longitudo altiore, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ~ 2½ | +0.06 | +1.6 | ±0.03 | ±0.8 | Non minus quam 87.5% nominatim Crassitudo | ±0.06 | ±2 | ±0.06 | ±2 | ±0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ±0.06 | ±1.6 | ±0.06 | ±1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ±0.25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ±0.12 | ±3.2 |
| ±0.09 |
| ±0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0.25 -0.19 | +6.4 -4.8 | ±0.19 | ±4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ±0.12 | ±3 | ±0.19 | ±5 | ±0.38 | ±10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ±0.19 | ±5 |
|
|
| |
| Pipe Size | Lapis felis Stub desinit (2) | 180 Redi Banus | ||||||||||
|
| Extra Diameter Lap, G | Lap Crassitudo | Infula Radius de Lap, R . | Centre-ad-Center Dimension, O | Retro-to- Facie Dimension, K | Gratia diei et noctis Finibus, U* | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1.6 -0 | +0 -0.03 | +0 -1 | ±0.25 | ±6 | ±0.25 | ±6 | ±0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0.12 -0 | +3.2 -0 |
|
| ±0.38 | ±10 |
|
| ±0.06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Pipe Size | Off Angulus, Q | Off Plane, P | ||
|
| IN | MM | IN | MM |
| ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32~ 42 | ± 0.50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
NOTAE:
Extra-rotundum est summa valorum absolutorum plus et minus tolerantiarum.
Extra diametrum dolii mensam vide in pagina XV.
